Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Renault Clio 4

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Air filter

If the engine of your Renault Clio Mk4 (2012-2019) often overheats due to a faulty or excessively worn air filter, you must replace it. Below, we will discover how to carry out this operation. First, lift the bonnet and locate the box containing the filter. Next, unscrew the screws and remove the protective cover located on the top of the box. Now, replace the old air filter with a new, perfectly compatible one, and finally, reattach the cover correctly.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of the Renault Clio 2012
How to replace the air filter of the Renault Clio 2012
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Replacing the engine air filter of your Renault Clio third series (year 2012) is really simple and thanks to the procedure described below, you will …
How to Replace the Air Filter on the Renault Clio 1.5 DCI
How to Replace the Air Filter on the Renault Clio 1.5 DCI
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this brief and simple guide, follow the necessary steps to remove and replace the engine air filter on the Renault Clio 1.5 DCI. First, open the b…
How to replace the engine air filter of the Renault Clio 5
How to replace the engine air filter of the Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) If it is time to replace the engine air filter of your Renault Clio fifth series, all you need to do is read the following guide carefully and follow…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos