Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does the spanner warning light mean in the Renault Twingo and how to reset it?

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Key

See other generations:
Video tutorial

If the spanner warning light has illuminated on the dashboard of your Renault Twingo, it means it is time for a service as the relevant interval has been reached. Once this is done, you can manually reset the light by following this simple procedure.

First, enter the cabin and turn on the instrument panel. Then, using the button at the end of the right control lever, scroll through the various screens until you reach the one displaying the same warning light.

Keep the button pressed until the interval is completely reset.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Twingo?
How to Reset the Service Light on a Renault Twingo?
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To reset the service light on a Renault Twingo, turn on the ignition by rotating the key in the ignition switch: once it is on, scroll through the me…
How to Reset the Maintenance Light on the Renault Twingo 3
How to Reset the Maintenance Light on the Renault Twingo 3
Renault Twingo (2014-2024 / Twingo III, Twingo 3) This tutorial shows the procedure to reset the maintenance light on the Renault Twingo 3. This procedure takes less than 1 minute to complete. To res…
Removing the Wheel on a Renault Twingo
Removing the Wheel on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Replacing a damaged wheel on the Renault Twingo? Let's go through the process. Open the boot and take out the wheel removal kit, which includes: jack…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos