Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to restore maintenance on the Renault Twingo 3

Model: Renault Twingo Twingo 3, Twingo III - Years 2014-2024
Part: Checks and maintenance

In this video tutorial, we are shown the procedure to reset the maintenance light on the Renault Twingo 3. This procedure takes less than 1 minute to complete. To reset this light, first start the instrument panel, then press and hold the down arrow button on the windshield wiper lever, hold it for a few seconds until the display shows "20000 kilometers". When this message appears on the display, it means that the reset is complete and you can restart the instrument panel to verify that the procedure was successful.

Posted on 7 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Twingo 2
How to reset the service light on the Renault Twingo 2
Renault Twingo (2007-2014 / Twingo 2) In this video, we are shown how to reset the maintenance light of the Renault Twingo 2. The procedure is simple and takes less than 1 minute to compl…
…
How to Reset the Maintenance Light on a Renault Twingo
How to Reset the Maintenance Light on a Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Today we will discover how to reset the maintenance light on the Renault Twingo. First, get into the vehicle and turn on the ignition; then press the…

Other guides you may be interested in

    Frequently Asked Questions

    • Twingo 1993-2007 - Where is the OBD port on the Renault Twingo located? Read answer
    • Twingo 2014-2024 - What are the problems of the Renault Twingo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos