Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Renault Koleos?

Model: Renault Koleos MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

To replace the cabin filter on a Renault Koleos, loosen the screws securing the plastic panel of the dashboard located behind the footwell and on the side of the driver's footrest. Once this panel is removed, you will have access to the filter box, which can be accessed by removing its cover.

Now, the filter inside can be pulled out and replaced with a new spare part. After replacement, reinstall the plastic panel at the back of the footwell.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter of a Renault Koleos
How to Replace the Cabin Filter of a Renault Koleos
Renault Koleos (2016-2024 / MK 2) To replace the cabin filter of a Renault Koleos, loosen the screws securing the protection panels of the centre tunnel on the side facing the passeng…
How do you replace the cabin filter of the Renault Koleos?
How do you replace the cabin filter of the Renault Koleos?
Renault Koleos (2008-2015 / MK 1) To replace the cabin filter of the Renault Koleos, you need to detach the panel of the footwell compartment located on the driver's side for left-han…
How to Replace the Cabin Filter in a Renault Koleos
How to Replace the Cabin Filter in a Renault Koleos
Renault Koleos (2008-2015 / MK 1) To replace the cabin filter in a Renault Koleos, loosen the screws that secure the panel located on the right side of the driver's footwell. Once the…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos