Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Laguna
  6. : How do you replace the headlight bulb on a Renault Laguna?

Renault Laguna - Video tutorial

Model: Renault Laguna MK 3, Laguna III, Laguna 3, MK III, X91 - Years 2007-2015
Part: Headlight bulb
Operation: How do you replace the headlight bulb on a Renault Laguna?

Replacing the headlight bulb on the Renault Laguna is done by opening the hood, so that access can be gained to the interior of the headlight corresponding to the bulb that needs to be replaced. There will be an internal protective cover here, which must be removed in order to access the underlying bulb; the latter must be disconnected from its connector, so that it can be completely removed from inside the headlight. After removal, the new replacement piece must be inserted, closing the headlight with its cover and verifying that everything works correctly.


Posted on 31 May 2023 by ScegliAuto



How do you replace the headlight bulb on the Renault Laguna?
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) Replacing the headlight bulb on the Renault Laguna is done by opening the bonnet, so that you can access the components located in the rear part of t
How to replace the headlight bulb on the Renault Laguna?
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) In order to replace the headlight bulb on the Renault Laguna, the hood must be opened to access the interior of the headlight, where the circular pro
How do you replace the headlight bulb on the Renault Laguna?
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) The headlight bulb replacement operation on the Renault Laguna is carried out by opening the bonnet, so that you have access to the components locate

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos