Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Laguna
  6. : How do you replace the headlight bulb on the Renault Laguna?

Renault Laguna - Video tutorial

Model: Renault Laguna X74, MK 2, Laguna 2 - Years 2001-2007
Part: Headlight bulb
Operation: How do you replace the headlight bulb on the Renault Laguna?

The headlight bulb replacement operation on the Renault Laguna is carried out by opening the bonnet, so that you have access to the components located inside the headlight: there will be a circular cover here which must be detached in order to access to the bulb located inside the headlight. This must be disconnected from the relative connector and removed from its seat, so that a new bulb can be connected to the connector. The new bulb installed must now be inserted inside the lighthouse, closing it with the cover and checking that it is working.


Posted on 13 December 2022 by ScegliAuto



How do you replace the headlight bulb on a Renault Laguna?
Renault Laguna (2007-2015 / MK 3, Laguna III, Laguna 3, MK III, X91) Replacing the headlight bulb on the Renault Laguna is done by opening the hood, so that access can be gained to the interior of the headlight corresp
How do you replace the headlight bulb on the Renault Laguna?
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) Replacing the headlight bulb on the Renault Laguna is done by opening the bonnet, so that you can access the components located in the rear part of t
How to replace the headlight bulb on the Renault Laguna?
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) In order to replace the headlight bulb on the Renault Laguna, the hood must be opened to access the interior of the headlight, where the circular pro

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos