Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Bulb for the Third Brake Light on a Renault Espace IV

Model: Renault Espace MK 4 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Light bulb

See other generations:
Video tutorial

In this video, we will show you how to replace the bulb for the third brake light on a Renault Espace IV: you need to open the tailgate and remove the plastic cover located at the top of the tailgate, which covers the stop bar. You will only need a plastic spatula to pry one side, as it is just plastic clips.

You can find W16E 12V 16W bulbs at any supermarket, electronics store, or parts dealer for just a few pounds.

To remove them from their housing, simply turn them a quarter turn and pull them out of the socket, then reverse the process to insert them again. At this point, you can press the plastic cover back into place, and the job is done.


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to replace the rear light and bulbs on a Renault Espace
How to replace the rear light and bulbs on a Renault Espace
Renault Espace (2015-2022 / MK 5) Today we will discover the instructions that will allow us to remove the rear light and its bulbs on a Renault Espace. First, open the tailgate and s…
How to Replace the Rear Light Bulb on a Renault Espace
How to Replace the Rear Light Bulb on a Renault Espace
Renault Espace (2002-2014 / MK 4) Before starting, open the rear tailgate of your Renault Espace. Begin by unscrewing and removing the screws that secure the light unit to the vehicle…
Where is the OBD port of the Renault Espace 5 located?
Where is the OBD port of the Renault Espace 5 located?
Renault Espace (2015-2022 / MK 5) In the following guide aimed at all of you who own a fifth series Renault Espace, we will help you find the OBD port quickly and safely. First of all…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos