Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Cabin Air Filter

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter is located on the passenger side, just below the glove compartment; this filter has a unique feature, as it does not have a cover to remove but instead has a plastic reinforcement at its end that acts as a cap; locate the filter housing, grasp the plastic part and pull until the filter is extracted from its housing; ensure there are no dirt residues inside the filter housing and insert the new filter until the plastic edge fits perfectly into its respective housing.

It is recommended to sanitise the cabin with a suitable spray.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

Renault Twingo (2014-2024 / Twingo III, Twingo 3) In this new guide of ours, we will discover the necessary steps that you must follow to complete the replacement of the cabin air filter of your Rena…
Renault Twingo (2007-2014 / Twingo 2) In this video tutorial, you will see the instructions to remove and replace the engine air filter of a Renault Twingo 2 1.5 DCi. First, open the bonn…
Renault Twingo (2014-2024 / Twingo III, Twingo 3) If you want to replace the cabin air filter in your Renault Twingo third series, simply follow the steps described. First, purchase a new air filter …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos