Do it yourself
| ||||
|
Renault Scenic - Video tutorial
Model: Renault Scenic
MK III, MK 3, Scenic III, Scenic 3
- Years 2009-2015 To reset the service on the Renault Scenic, we insert the card into its slot so that the dashboard turns on and we notice that the spanner warning light is on with the message "service required". We proceed to reset it by removing the card from the slot to turn off the dashboard, then reinserting it to turn it back on. We hold down the two buttons on the right-hand side of the windscreen wiper lever until the writing on the instrument panel begins to flash and the new mileage appears after releasing the buttons, and the spanner warning light also turns off. Finally, we can remove the card from the slot to turn off the instrument panel.
Posted on 18 June 2023 by ScegliAuto
How to reset the "Service" light on a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Before starting, we will have to sit in the driver's seat of our Renault Scenic. So let's start by activating the engine of our car, simply by turnin
How to reset the "Service" warning light on a Renault Scenic?
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) Before starting, we will have to make sure that the service has actually been carried out, and then we will have to sit in the driver's seat of our R
How do you reset the Service light on the Renault Scenic?
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) To reset the Renault Scenic's Service light, turn on the instrument panel by turning the key in the ignition block. Once the panel is on, use the dow Other guides that may interest you |
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |