Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Captur
  6. : Cabin air filter replacement

Renault Captur - Video tutorial

Model: Renault Captur MK 1 - Years 2013-2019
Part: Cabin air filter
Operation: Cabin air filter replacement

The cabin air filter in the car model in question is located just behind the center tunnel console and is accessed laterally from the passenger side; then intercept the filter seat and remove the cap to be able to extract it: during extraction the filter will tend to deform as the access mouth is smaller than the size of the filter itself; once you are sure that there are no residues of dirt inside the filter housing, insert the new one, deforming it in a fan shape to allow access through the inlet: the filter is flexible enough to resume its shape once inserted into its site.


Posted on 31 August 2023 by ScegliAuto



How to replace the cabin air filter of the Renault Captur.
Renault Captur (2019-2024 / MK 2) Replacing the cabin air filter of the Renault Captur is a very simple operation, thanks to the help of our short video tutorial. The first thing to d
How to replace the cabin filter on the Renault Captur II
Renault Captur (2019-2024 / MK 2) In this video, we see how to replace the cabin air filter of the Renault Captur II: the filter is located under the glove compartment, in the lowest
How to replace the cabin filter of the Renault Captur.
Renault Captur (2013-2019 / MK 1) The replacement of the cabin air filter on your first-generation Renault Captur is a very simple operation and with the following guide, you will be

    Frequently Asked Questions

    • Captur 2013-2019 - Where is the pollen filter of the Renault Capture located? Read Answer
    • Captur 2013-2019 - Where is the cabin filter of the Renault Captur located? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos