Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you change the cabin filter of the Renault Captur?

Model: Renault Captur MK 2 - Years 2019-2026
Part: Cabin air filter

The cabin air filter serves to filter the air we breathe inside the car's cabin; it is therefore important because if it is dirty and full of dust it will not be able to filter anything and we will breathe stale air. In the Renault Captur, the filter is located in the most advanced part of the footwell on the right side; here, right at the top of the mat, we find a cover placed vertically; let's open it, and inside we find our filter. Clean the container well with a spray of compressed air and a microfiber cloth, then put the new and clean filter back in place, paying attention to the position of the arrows, which indicate the direction of installation of the filter: they must always point downwards. Close the little door and you're done.

Posted on 4 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the cabin filter of the Renault Captur MK2
How to change the cabin filter of the Renault Captur MK2
Renault Captur (2019-2026 / MK 2) In this video, we see how to change the cabin air filter on a Renault Captur MK2: the door where this filter is located is inside the passenger footw…
How to Replace the Cabin Filter on a Renault Captur
How to Replace the Cabin Filter on a Renault Captur
Renault Captur (2013-2019 / MK 1) To replace the cabin filter on a Renault Captur, start by going to the passenger side. Bend down in the footwell and look up; you will find a rectang…
How to replace the cabin filter on the Renault Captur II
How to replace the cabin filter on the Renault Captur II
Renault Captur (2019-2026 / MK 2) In this video, you will learn how to replace the cabin air filter on the Renault Captur II: the filter is located under the glove compartment, at the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos