Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on a Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Cabin air filter

To replace the cabin filter on a Renault Captur, start by going to the passenger side. Bend down in the footwell and look up; you will find a rectangular cover that conceals the cabin filter. Remove the screw holding the cover, pry it off, and take it out. With the cover removed, pull the old cabin filter from its slot. Take the new cabin filter and insert it into the slot in the same orientation as the old one. Replace the cover, ensure it is in position, reinsert the screw, tighten it, and the filter has been changed.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Renault Captur
How to replace the cabin air filter of the Renault Captur
Renault Captur (2013-2019 / MK 1) In order to ensure optimal air quality inside the cabin of your Renault Captur when using the air conditioning, you must periodically replace the air…
Replacement of the cabin filter of a Renault Captur
Replacement of the cabin filter of a Renault Captur
Renault Captur (2013-2019 / MK 1) Today we will see how to replace the cabin filter on a first-generation Renault Captur. The operation is very simple to do and we can do it independe…
How to replace the cabin air filter of the Renault Captur 2
How to replace the cabin air filter of the Renault Captur 2
Renault Captur (2019-2026 / MK 2) To safely and correctly carry out the replacement of the cabin air filter in your Renault Captur Mk2, simply follow the procedure described in our ne…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos