Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin filter on the Renault Captur II

Model: Renault Captur MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Cabin air filter

See other generations:
Video tutorial

In this video, you will learn how to replace the cabin air filter on the Renault Captur II: the filter is located under the glove compartment, at the lowest part of the central tunnel on the front passenger side; essentially in its footwell. Here you will find a small drawer that you will pull towards you, and inside you can find the paper filter.

Before proceeding with the replacement, clean the compartment of dust and debris, then change the filter, perhaps taking the suggestion from the YouTuber to purchase the new filter from wixeurope.com where you can easily find the most suitable filter for your vehicle.

Then insert the filter, paying attention to the fitting direction, and close the cover.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter in a 2015 Renault Captur
How to Replace the Cabin Filter in a 2015 Renault Captur
Renault Captur (2013-2019 / MK 1) In this new guide for all you owners of a first series Renault Captur (2015), we will describe the various steps necessary to correctly replace the c…
How to Replace the Cabin Filter on a Renault Captur
How to Replace the Cabin Filter on a Renault Captur
Renault Captur (2013-2019 / MK 1) To replace the cabin filter on a Renault Captur, start by going to the passenger side. Bend down in the footwell and look up; you will find a rectang…
How to Replace the Cabin Filter in a Renault Captur
How to Replace the Cabin Filter in a Renault Captur
Renault Captur (2013-2019 / MK 1) Replacing the cabin filter in a Renault Captur, as shown in this tutorial, is a very simple and quick operation. First, position yourself in the pass…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos