Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamps on the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Headlight

In this brief and simple guide, follow the steps to remove and replace the front headlamp of the Renault Clio. First, open the bonnet of your car and use a star or socket spanner to loosen the nuts of the headlamp; then remove the plastic protective cover and disconnect the bulb's electrical connector, as shown in the video. At this point, unclip the bumper on the sides to access the lower nut of the headlamp, thus removing the entire optical unit; apply the reverse procedure for reassembly!

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Bulb of the Rear Light on a Renault Clio
How to Replace the Bulb of the Rear Light on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) To replace the bulb of the rear light on a Renault Clio, open the tailgate to access the knob inside the boot, located near the light containing the …
How to replace the rear headlight bulb of the Renault Clio 4
How to replace the rear headlight bulb of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The steps to replace the rear headlight bulb of the Renault Clio 4 are: -open the trunk; -remove the side cover, located on the trunk cover; -unscrew…
How to Install the Headlights and Replace the Headlight Bulb of the Renault Clio
How to Install the Headlights and Replace the Headlight Bulb of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, I will explain how to install the front headlights of the Renault Clio and replace the front bulbs. The first step after removing the headligh…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos