Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to replace the injectors of the Renault Megane 2?

Renault Megane - Video tutorial

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Injectors
Operation: How to replace the injectors of the Renault Megane 2?

Let's watch the illustrated instructions in the first few minutes of the video and gather all the necessary tools, then remove the various parts that obstruct access to the injectors. Now let's disconnect the glow plug next to the injector and the injector socket that we can clean with a specific spray. Using pliers, we disconnect the plastic fuel return line. Remove the tubes as shown in the video and then unscrew the injector mounting plate and extract them using a wrench. We also replace the injector gasket. Follow the procedure in reverse to install the new injectors.


Posted on 5 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Megane 2002-2010 - What to do if a Renault Megane injector is clogged? Read Answer
    • Megane 2008-2015 - What causes the injector problem on Renault Megane? Read Answer
    • Megane 2008-2015 - What problems do the injectors have on the Renault Megane 1.5 dCi 110 HP? Read Answer
    • Megane 2008-2015 - How to recognize a problem with the injectors in the Renault Megane? Read Answer
    • Megane 2008-2015 - How much does it cost to replace the injectors on a Renault Megane? Read Answer
    • Megane 2008-2015 - What does the lighting of the anti-pollution warning light mean on the Renault Megane 3? Read Answer
    • Megane 2002-2010 - How much do the Renault Megane II 1.9 diesel injectors cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos