Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to replace the wipers

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Windscreen wipers
Operation: How to replace the wipers

Replacing the wipers is a very simple operation, as long as you have verified that the ones you have spare are compatible with the year and model of the car. To replace the windshield wiper simply lift the arm from the windshield. With a tool, move the tab that acts as a stop and then extract the wiper from its seat. When reassembling the new one, you must insert the tip of the arm into the fixing block by pushing it until it hooks into the stop. Check that the wiper is fixed correctly and repeat the same operation for the other wiper. Car model: Renault Grand Scenic II Tools required: Flat blade screwdriver


Posted on 4 September 2023 by ScegliAuto




Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) Today's steps will show us how to dismantle and replace the front wipers of the Renault Scenic, following the instructions below. First, lift the wip
How to change the windshield wipers of a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Hi, in this video we will see how to replace the windshield wipers of a Renault Scenic in a practical and fast way. First you have to open the hood f
Renault Scenic 1.5 DCi EGR valve replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) In this video tutorial we will see how to remove and replace (or clean) the EGR valve of a Renault Scenic 1.5 DCi. First we open and lift the bonnet

Other guides that may interest you

    Frequently Asked Questions

    • Scenic 2009-2015 - How to replace the rear wiper arm in the Renault Scenic? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos