Do it yourself
Frequently asked questions about cars and motorcycles

Rear Shock Absorber Replacement

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Shocks

Replacing the rear shock absorber is generally simpler than the front one since the spring and damper are separate; lift the vehicle and remove the plastic cover applied to the suspension to access the shock absorber mounting nut; lower the vehicle by placing a support jack under the suspension and access the boot, remove the support plate and the cover underneath to dismantle the shock absorber mounting pin located laterally; then move to the lower nut, remove the old shock absorber and insert the new one, proceeding in reverse for installation.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2002-2010 / Megane 2) Do you want to remove the rear shock absorber from a Renault Megane? Follow these steps carefully. The first step: loosen the wheel nuts, lift the ca…
Renault Megane (2002-2010 / Megane 2) Replacing the rear shock absorbers is very simple to execute since the damper and spring are not co-axial, so clamps do not need to be applied to com…
Renault Megane (2015-2023 / Megane 4, Megane IV) On the Renault Mégane, the work starts in a classic way: the vehicle is lifted at the rear, and work is done on the wheel by loosening and then remov…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos