Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Captur
    4. : How to remove the squeaks from the plastic parts of the Renault Captur?

Renault Captur - Video tutorial

Model: Renault Captur MK 2 - Years 2019-2024
Part: Bodywork
Operation: How to remove the squeaks from the plastic parts of the Renault Captur?

Unfortunately, the Renault Captur's internal plastics creak, especially in winter with colder temperatures. It's not a consolation, but let's see where our YouTuber has located the creaks, which he fixes with chair felt pads. First of all, in the central console, under the air conditioning controls, and in the two side parts of the same console. Another place where the squeaking occurs is between the seal and the inner panel of the front doors. For our friend, the situation seems to have been resolved. In the case of the automatic transmission, there may be other problems arising from the plastic parts of the automatic transmission, which can be solved with the same system.


Posted on 27 October 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Captur 2019-2025 - What to do when the fuel cap flap is stuck on the Renault Captur? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos