Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Gear Knob on a Renault Captur

Model: Renault Captur MK 1 - Years 2013-2019
Part: Shift knob

Today's guide will show you the main steps to remove and replace the gear knob on a Renault Captur, as well as on a Clio. First, get inside the vehicle and start by detaching and removing the gear gaiter, prying it off the sides; then detach the clip between the gaiter and the knob, pulling firmly upwards to detach and remove it from the gear lever, as shown in the video. At this point, install the gaiter first and then the knob, securing them with the clip, following the video tutorial to the end!

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Knob and Gaiter on the Renault Captur?
How to Replace the Gear Knob and Gaiter on the Renault Captur?
Renault Captur (2013-2019 / MK 1) This guide will show you how to remove and replace the gear knob and gaiter on the Renault Captur, as well as the Clio. First, get inside the vehicle…
How to remove the gear knob of the Renault Captur 2024
How to remove the gear knob of the Renault Captur 2024
Renault Captur (2019-2026 / MK 2) If you own a second edition Renault Captur (year 2024) and want to find out how to remove the gear knob, then all you have to do is read the followin…
How to Replace the Gear Knob on a Renault Captur?
How to Replace the Gear Knob on a Renault Captur?
Renault Captur (2013-2019 / MK 1) In this short but effective video tutorial, you will learn how to easily remove and replace the gear knob on your Renault Captur in just a few minute…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos