Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the cabin filter of the Renault Kadjar?

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Cabin air filter

The replacement of the cabin filter of the Renault Kadjar is done by removing the protective panel located on the left side of the footwell on the passenger side. Once this panel has been removed, the underlying cover can be located and removed from its housing in order to extract the underlying cabin filter. Once this filter has been removed, the new replacement piece can be inserted, covered with the appropriate cover, and the panel can be reinstalled.

Posted on 3 November 2023 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the cabin filter in the Renault Kadjar?
How do you replace the cabin filter in the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) Let's say that even the Renault Kadjar has its cabin filter housed in one of the canonical points, namely inside the cabin, behind the dashboard glov…
How to replace the air filter of the Renault Kadjar
How to replace the air filter of the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The cabin air filter of the Renault Kadjar is located inside the cabin, specifically under the passenger side glove compartment. To replace the cabin…
How do you replace the cabin filter of the Renault Kadjar?
How do you replace the cabin filter of the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) The cabin filter on the Renault Kadjar can be replaced by finding the corresponding housing, which will be located immediately below the glove compar…

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos