Do it yourself
Frequently asked questions about cars and motorcycles

What to do if the handbrake light on the Renault Trafic does not work.

Model: Renault Trafic MK 3 - Years 2014-2024
Part: Hand brake

In this video, we see how to act if the handbrake light of the Renault Trafic does not turn on: the first thing to do is lift the covering that covers the handbrake lever, which can be opened with one hand because it is only attached with clips. Once the cover is lifted, we see that at the back there is the electrical connector, which is the one that controls the activation of the brake light, which in our case has become loose. If we put it back in place properly (if the connection is not secure enough, we can wrap it with insulation tape), we will see that the light turns on normally. We can put the brake cover back in place. The job is done.


Posted on 26 November 2023 by ScegliAuto



How to disassemble the side turn signal light of the Renault Trafic
Renault Trafic (2001-2014 / MK 2) In this new guide of ours, we will discover together how to remove the side indicator light of your Renault Trafic. It is a very simple operation to
How to reset the service light on the Renault Trafic van?
Renault Trafic (2014-2024 / MK 3) In this tutorial we can see how to reset the service in the Renault Trafic van, an extremely simple and quick operation, to be carried out only once
How to reset the service light of the Renault Trafic 2014
Renault Trafic (2001-2014 / MK 2) The procedure required for manually resetting the service warning light on your 2014 Renault Trafic is practically identical to that used in many oth

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos