Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Manually Lock a Renault Clio III When the Remote Doesn't Work

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Key

See other generations:
Video tutorial

In this video, you can see how to manually lock a Renault Clio III when the remote doesn't work from the outside. In this case, you will be forced to leave the vehicle open.

This same procedure also works on Trafic, Megane, and all Renault vehicles with a locking button like the one shown in the video. It is recommended not to leave the keys in the car while performing this operation.

Open the door, and next to the hazard light button, you will find the internal locking button. Press it for a few seconds until you hear the sound of the doors locking.

Now close the doors; they are locked.


Updated on 31 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Clio MK III
How to Reset the Service Light on a Renault Clio MK III
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To reset the service light on a Renault Clio MK III, first, get into the vehicle, close all four doors, and turn the key to position 1, powering on t…
How do you replace the battery of the Renault Clio remote control?
How do you replace the battery of the Renault Clio remote control?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace the battery of the Renault Clio remote control, you will need to press the button located on the top of the device: this way you will be a…
How to Replace the Key Battery of a Renault Clio
How to Replace the Key Battery of a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Replacing the remote battery of a Renault Clio follows simple and quick steps that can be done independently. To replace the key battery, you need to…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos