Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on the Renault Megane 3

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Clock

In this article, you will learn the procedure to adjust the time on the Renault Megane 3. The procedure is quick and takes little time to complete. First, turn on the instrument cluster, then press the setup button located below the radio. At this point, use the dial to scroll through the menu until you reach the clock option and confirm by pressing the centre button of the dial, adjust the hour, confirm, then adjust the minutes and confirm again. As you can see, it is very simple, requires no tools or software, and takes less than 1 minute to complete.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time in a Renault Megane
How to Set the Time in a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) As seen in this tutorial, setting the time in a Renault Megane 3 is very simple. This operation should be performed after the battery has been discon…
How to Set the Time in a Renault Megane?
How to Set the Time in a Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) In this tutorial, see how to set the time in a Renault Megane, a very simple and quick operation to perform, for example, after replacing the battery…
How to adjust the clock on the Renault Megane 2
How to adjust the clock on the Renault Megane 2
Renault Megane (2002-2010 / Megane 2) In today's tutorial, we will see how to adjust the time on the Renault Megane second series in simple steps. First, get in the vehicle and press the …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos