Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuse on a Renault Twingo

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Fuse box

See other generations:
Video tutorial

Replacing a fuse on a Renault Twingo model 1 is a straightforward task that you can do yourself, saving on potential workshop costs. First, open the fuse box; for the Renault Twingo, you need to remove the glove compartment on the driver's side by simply pulling it outwards.

Next, remove the pliers from the fuse panel to make it easier to extract and insert the fuses. Using the diagram on the back of the glove compartment, locate the position of the fuse to be replaced.

Remove the old fuse, insert the new one, and close the fuse box by refitting the glove compartment.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

Location and Diagram of the Fuse Box on Renault Twingo
Location and Diagram of the Fuse Box on Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) The fuse box for the cabin is located inside the glove compartment on the Renault Twingo. Here you will find, for example, the fuse that controls the…
Fuse Diagram for a Renault Twingo
Fuse Diagram for a Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) With this very useful video guide today, we can see all the diagrams for the fuse box of a Renault Twingo, third generation model produced from 2014 …
What is the fuse diagram for the Renault Twingo?
What is the fuse diagram for the Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) In this video, you can see the location of the fuse box for the Renault Twingo and the corresponding diagram, useful if one or more devices in the ca…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos