Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Scenic
  6. : Rear shock absorber replacement

Renault Scenic - Video tutorial

Model: Renault Scenic - Years 1996-2003
Part: Shock absorbers
Operation: Rear shock absorber replacement

The replacement of the rear shock absorbers is much easier to carry out than the front ones since the spring and the shock absorber are separate and you do not have to use the special clamps to separate them; therefore lift the car on the bridge, remove the rear wheel, apply a support jack just under the suspension and unscrew the lower fixing pin of the shock absorber; to access the upper one, the inner lining of the wheel arch must be removed in order to complete the disassembly and install the new one by proceeding backwards.


Posted on 15 September 2023 by ScegliAuto



How to remove rear shock absorber on Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) Do we want to remove the rear shock absorber of a Renault Scenic? Let's see how to do it: we loosen the pins of the rim with a special tool (telescop
How to remove the front shock absorber of a Renault Scenic
Renault Scenic (2003-2009 / MK 2, Scenic 2) How to remove the front shock absorber of a Renault Scenic? The first step to follow: we lift the car on a column bridge and take off the front wheel
Car shock absorber replacement
Renault Scenic (2003-2009 / MK 2, Scenic 2) Shock absorbers are a system that aims to slow down the suspension movements of a given machine. When our car has a lot of kilometers, they need to b

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos