Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Time on a 2009 Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Clock

Setting the clock on a 2009 Renault Megane 2 is a straightforward task that can be done in just a few minutes. First, turn on the vehicle's ignition. Second, press and hold the Menu button located on the right-hand side of the gear lever for a few seconds to access the clock menu. Third, press the button with the speaker symbol to set the hours. Fourth, press the confirm button to adjust the minutes, using the same button. Once you have set the new clock, you can turn off the ignition.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the clock of the Renault Megane 3
How to adjust the clock of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) The steps to adjust the clock on a Renault Megane model 3 vehicle are 5. -the first step: turn on the instrument panel; -the second step: press the M…
How to Set the Time in a Renault Megane?
How to Set the Time in a Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) In this tutorial, see how to set the time in a Renault Megane, a very simple and quick operation to perform, for example, after replacing the battery…
How to set the time on the Renault Megane 3
How to set the time on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) The steps to set the time on the Renault Megane 3 are: 1) turn on the car radio; 2) press the "SETTINGS" button located on the central dashboard at t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos