Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Tyre Pressure Warning Light on the Renault Megane

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Tire pressure warning light

Today, you will see the instructions that will allow you to reset the tyre pressure warning light (TPMS) on the Renault Megane; before performing the reset operation, it is necessary that all four tyres are at the correct operating pressure. Then, get into the vehicle and connect your computer with the appropriate diagnostic software to the OBD 2 port located below; then turn on the ignition. Now select the make, model, and engine type, following the procedure indicated to reset the tyre pressure warning light from the instrument cluster.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on the Renault Megane?
How to Reset the Tyre Pressure Warning Light on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To reset the tyre pressure warning light on the Renault Megane, first inflate the tyres to the correct pressure value: this value is indicated on the…
How to Reset the TPMS Light on a Renault Megane IV
How to Reset the TPMS Light on a Renault Megane IV
Renault Megane (2015-2023 / Megane 4, Megane IV) Before resetting the TPMS light on a Renault Mégane IV, it is necessary to check the operation of the tyre pressure sensors; if they are malfunctioni…
How to reset the tire pressure warning light on the Renault Megane
How to reset the tire pressure warning light on the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) These short and simple steps will allow us to reset the tire pressure monitoring system (TPMS) light on the Renault Megane; before performing the res…

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos