Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light in a Renault Megane?

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part:

Resetting the tyre pressure light in a Renault Megane, as shown in this tutorial, is an extremely simple and quick operation. Before doing this, ensure you have restored the correct pressure in each tyre according to the instructions in the manual. Start by entering the cabin, then turn on the ignition and, using the directional arrows on the steering wheel, navigate to the relevant warning screen. At this point, press and hold the "OK" button for at least 10 seconds, or for as long as necessary for the light to disappear completely.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Renault Megane?
How do you reset the tire pressure warning light on the Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) The tire pressure sensor of the Renault Megane can be eliminated from the instrument panel by inflating the tires to the recommended pressure value; …
How do you reset the tire pressure warning light on the Renault Megane?
How do you reset the tire pressure warning light on the Renault Megane?
Renault Megane (2015-2023 / Megane 4, Megane IV) To reset the tire pressure warning light of the Renault Megane, you need to inflate the tires to the recommended pressure value, which is indicated o…
How to reset the tire pressure warning light on the Renault Megane
How to reset the tire pressure warning light on the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) These short and simple steps will allow us to reset the tire pressure monitoring system (TPMS) light on the Renault Megane; before performing the res…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos