Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Temperature Sensor on a Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

Here are the brief instructions that will allow you to remove and replace the external temperature sensor on the Renault Megane. First, locate the external temperature sensor, which is found on the exterior rear-view mirror; then remove the glass and disconnect the small electrical connector, thus accessing the sensor, as shown in the video.

At this point, remove and replace the external temperature sensor with the new one, inserting and securing it properly; then refit the glass of the rear-view mirror, applying the reverse procedure!


Updated on 10 September 2026 by ScegliAuto


Related tutorials

How to synchronize the air on both sides in a Renault Megane III
How to synchronize the air on both sides in a Renault Megane III
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, we see how to synchronize the temperature on both sides of the car with the automatic air conditioning of the Renault Megane III: if w…
How to Remove the Crankshaft Position Sensor on a Renault Megane
How to Remove the Crankshaft Position Sensor on a Renault Megane
Renault Megane (2002-2010 / Megane 2) How to remove the crankshaft position sensor on a Renault Megane? Let’s look at the replacement. Lift the front bonnet and secure it with the prop ro…
How to Replace the ABS Sensor on the Renault Megane
How to Replace the ABS Sensor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) This guide shows you how to remove and replace the ABS (Anti-lock Braking System) sensor on the Renault Megane, following the instructions below. Fir…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the horn of a Renault Megane located? Read answer

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos