Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the ABS Sensor on the Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

See other generations:
Video tutorial

This guide shows you how to remove and replace the ABS (Anti-lock Braking System) sensor on the Renault Megane, following the instructions below. First, lift the vehicle and remove the front wheel; then locate the sensor situated behind the suspension spring, disconnecting the electrical connector to remove the wiring along with the sensor, as shown in the video.

At this point, replace and install the new ABS sensor, securing it properly to the chassis and refitting the wheel, following the video tutorial to the end!


Updated on 15 August 2026 by ScegliAuto


Related tutorials

Change RPM Sensor on Renault Megane
Change RPM Sensor on Renault Megane
Renault Megane (1995-2003 / Megane 1) Replace the ABS sensor on a Renault Megane if it is damaged. Unscrew the wheel bolts with a socket wrench and (using an air drill) remove the wheel; …
Replacement of the Temperature Sensor on a Renault Megane
Replacement of the Temperature Sensor on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Here are the brief instructions that will allow you to remove and replace the external temperature sensor on the Renault Megane. First, locate the ex…
How to reset the pollution system warning light on the Renault Megane?
How to reset the pollution system warning light on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) When the pollution system fault light illuminates on the Renault Megane display, it indicates that this system is not functioning correctly. To turn …

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the horn of a Renault Megane located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos