Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the pollution system warning light on the Renault Megane?

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Warning light – error code

When the pollution system fault light illuminates on the Renault Megane display, it indicates that this system is not functioning correctly. To turn off the light, it is necessary to replace the exhaust gas pressure sensor. The old exhaust gas pressure sensor will be located inside the engine compartment: it should be disconnected from its connector and removed from its seat by unclipping its retaining clips. The new sensor can then be inserted into its seat and connected to the connector. Replacing the sensor will cause the warning light to turn off.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) This video outlines the main steps to reset the emission warning light on the Renault Megane third series, as well as on the Scenic 3 and Kangoo. Fir…
Renault Megane (2008-2015 / Megane III, Megane 3) When the pollution system warning light appears on the display of the Renault Megane, it indicates a problem with the exhaust or one of the sensors. …
Renault Megane (2015-2023 / Megane 4, Megane IV) In this guide, we will see the instructions that will allow us to restart the R-Link system of the Renault Megane. First of all, we get on board the …

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2002-2010 - How to enter the unlock code on the 2007 Renault Megane radio? Read answer
    • Megane 2008-2015 - What are the lights of the Renault Megane? Read answer
    • Megane 2015-2023 - How to reset tripmeter on Renault Megane? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos