Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Change RPM Sensor on Renault Megane

Model: Renault Megane Megane 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Checks and maintenance

See other generations:
Video tutorial

Replace the ABS sensor on a Renault Megane if it is damaged. Unscrew the wheel bolts with a socket wrench and (using an air drill) remove the wheel; start unscrewing the securing bolts of the ABS sensor (located above the brake disc).

Use a screwdriver to detach the clips holding the wiring. Remove the plastic splash guard if necessary and (as shown in the video) disconnect the power connectors inside the wheel arch.

Connect the new ABS sensor to the power connectors, install the sensor, and screw in the bolts. Reinstall the splash guard and the wheel with the securing bolts.

Test if it works.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Remove the Crankshaft Position Sensor on a Renault Megane
How to Remove the Crankshaft Position Sensor on a Renault Megane
Renault Megane (2002-2010 / Megane 2) How to remove the crankshaft position sensor on a Renault Megane? Let’s look at the replacement. Lift the front bonnet and secure it with the prop ro…
Replacement of the Temperature Sensor on a Renault Megane
Replacement of the Temperature Sensor on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Here are the brief instructions that will allow you to remove and replace the external temperature sensor on the Renault Megane. First, locate the ex…
How to Replace the ABS Sensor on the Renault Megane
How to Replace the ABS Sensor on the Renault Megane
Renault Megane (2002-2010 / Megane 2) This guide shows you how to remove and replace the ABS (Anti-lock Braking System) sensor on the Renault Megane, following the instructions below. Fir…

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos