Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio Frame of a Renault Clio?

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

You need to perform maintenance on your radio but don't know how to remove the frame that covers it and take it out of its housing? Don't worry, we will guide you. Today, you will learn how to practically and quickly remove the frame, the central dashboard vents, and the radio itself from their housings.

All you need is a plastic lever, which can be purchased online.

Insert the plastic lever into the central part of the dashboard and apply slight pressure to remove it; do the same for the other reference frames. Once finished with the frames, proceed to remove the central and side vents by inserting the plastic lever at the side to extract them.

Do the same with the radio.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from the Renault Clio
How to Remove the Radio from the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To remove the radio from the Renault Clio 4, use a tool to pry off the trim located at the centre of the dashboard, which surrounds the radio. Once t…
Replacement of the Renault Clio 2 car radio
Replacement of the Renault Clio 2 car radio
Renault Clio (1998-2005 / MK 2, Clio 2) In order to improve the audio system performance of the Renault Clio, we can replace the standard car radio with one with better features. We remove …
Replacing the Car Radio in the Renault Clio II
Replacing the Car Radio in the Renault Clio II
Renault Clio (1998-2005 / MK 2, Clio 2) If you want to improve the audio system performance of the Renault Clio, you can replace the factory-fitted car radio with a higher-performing one. G…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos