Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Captur
    4. : Modification of parameters to lower the windows with the remote control on a Renault Captur MK2.

Renault Captur - Video tutorial

Model: Renault Captur MK 2 - Years 2019-2024
Part: -board computer
Operation: Modification of parameters to lower the windows with the remote control on a Renault Captur MK2.

In this video, we will see how we can modify the settings on the onboard computer of our Renault Captur MK2, in order to make all four windows go down at once with the remote control. We need to modify some parameters in the windows configuration of our Renault Captur: to make the windows go down, we have to go to the BCM DDT 7_0 section. We search for "windows closing" which is already active (we will find it under "auto") and the parameter to set is "windows opening" which we need to set to "auto" just like the closing parameter. This way, we will have the windows going down with a double click of the remote control.


Posted on 5 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Captur 2019-2025 - What to do when the Renault Captur screen does not work? Read Answer
    • Captur 2013-2019 - What to do if the multimedia system is blocked in Renault Captur? Read Answer
    • Captur 2019-2025 - Why does the Renault Captur touch screen not work? Read Answer
    • Captur 2013-2019 - Why is the Renault Captur's on-board computer reporting non-existent error messages? Read Answer
    • Captur 2013-2019 - What to do if Renault's R-Link system does not work? Read Answer
    • Captur 2019-2025 - Why is the navigator of the Renault Captur not working? Read Answer
    • Captur 2019-2025 - Why is the touchscreen display of the Renault Captur not working? Read Answer
    • Captur 2013-2019 - Why doesn't the on-board computer of a Renault Captur turn on? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos