Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Renault Badge from the Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Manufacturer emblem

See other generations:
Video tutorial

In this video, you will learn how to remove the lettering, leaving only the Renault badge, from the rear of a Megane. Use a high-temperature hairdryer (a regular hairdryer will also work) and a simple piece of wire to remove all the lettering from the heated surface.

Next, clean the bodywork of any adhesive; for this, a bit of patience and a good degreaser will suffice. If the result does not look good, you can use a bodywork brush and polish: the result will be perfect, as seen in the last shot, where only the central Renault badge remains visible.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Badge of the Renault Megane 2?
How to Remove the Front Badge of the Renault Megane 2?
Renault Megane (2002-2010 / Megane 2) In this short video, you will see the main instructions that will allow you to remove and replace the badge or emblem of the manufacturer from the Re…
How to Change the System Language on a Renault Megane 4
How to Change the System Language on a Renault Megane 4
Renault Megane (2015-2023 / Megane IV, Megane 4) Changing the system language on your Renault Megane Mk4 is very simple. With the instructions in this new guide, you will complete the operation with…
How to reset the pollution warning light on a Renault Megane 1.6 diesel
How to reset the pollution warning light on a Renault Megane 1.6 diesel
Renault Megane (2015-2023 / Megane IV, Megane 4) Before you can start, sit in the driver's seat of your Renault Megane 1.6 diesel. Connect your laptop to the car and launch the specific software. Ne…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos