Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Side Indicator on the Renault Trafic 2016

Model: Renault Trafic MK 3 - Years 2014-2026
Part: Side marker light

If one of the side indicators on your 2016 Renault Trafic has suddenly stopped working, don't worry because with the following guide you will be able to replace the bulb quickly and correctly. The first step is to remove the light unit using a small flat screwdriver, taking care not to damage the light unit during the operation. Once removed, locate the faulty bulb and replace it with a new one. Finally, refit the light unit correctly, and you are done.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Seats of a Renault Trafic
How to Remove the Rear Seats of a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Before you begin, open the side door of your Renault Trafic. Start by unfastening the lower side hooks that secure the rear seats to the floor. Then,…
How to Reset the Service Light on a Renault Trafic Van?
How to Reset the Service Light on a Renault Trafic Van?
Renault Trafic (2014-2026 / MK 3) In this tutorial, you will learn how to reset the service light on a Renault Trafic van. This operation is extremely simple and quick, to be performe…
How to Reset the Service Light in the Renault Trafic Van?
How to Reset the Service Light in the Renault Trafic Van?
Renault Trafic (2014-2026 / MK 3) In this tutorial, you can see how to reset the service light in the Renault Trafic van, an extremely simple and quick operation to perform only after…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos