Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disable the Seatbelt Alarm on the Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Onboard computer

See other generations:
Video tutorial

Today, you will learn how to disable the seatbelt alarm on the Renault Clio model 4. Open the OBD2 port cover and insert the connector that you will connect to the PC; the port is located under the radio. Insert the key into the ignition without turning it on, and on the PC, open the "DDR4ALL" program, which you should have installed previously.

From here, follow the program settings, select the car model, and the reset you want to perform. For the seatbelt buzzer option, select disable.

Once finished, return to the main menu and disconnect the connector. Start the vehicle to check that the buzzer has been disabled.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Disable the Alarm System on a Renault Clio?
How to Disable the Alarm System on a Renault Clio?
Renault Clio (1998-2005 / MK 2, Clio 2) To replace the alarm system on a Renault Clio, you need to programme the car's ECU to ensure this system is no longer active: first, open the bonnet …
Replacing the Rear Seatbelt Anchorages on a Renault Clio
Replacing the Rear Seatbelt Anchorages on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Today, we will see the instructions that will allow you to remove and replace the rear seatbelt anchorages on a Renault Clio. First, open the rear do…
How to Disable Traction Control on the Renault Clio?
How to Disable Traction Control on the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To disable the traction control on the Renault Clio, connect the diagnostic tool to the OBD port of the vehicle, located below the steering column. O…

    Frequently Asked Questions

    • Clio 2012-2019 - How to fix bluetooth connection problems on Renault Clio? Read answer

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos