Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service indicator in the Renault Captur?

Model: Renault Captur MK 2 - Years 2019-2026
Part: Service warning light

In this tutorial, you will see how to reset the service indicator in the Renault Captur, a very simple and quick operation to perform only after completing all required scheduled maintenance tasks. Start by entering the cabin, then insert the key and turn on the instrument panel. Next, scroll through the various screens on the display using the directional arrows on the right-hand control stalk, reach the "Service intervals" option and hold down the down arrow to enter the section. To perform the reset, simply press and hold the same button again.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service in the Renault Captur?
How to reset the service in the Renault Captur?
Renault Captur (2019-2026 / MK 2) In this tutorial we can see how to reset the service in the Renault Captur, an extremely simple and quick operation, to be carried out only once all …
How to reset the oil service on the Renault Captur?
How to reset the oil service on the Renault Captur?
Renault Captur (2013-2019 / MK 1) In this tutorial, you will see how to reset the oil service on the Renault Captur, a very simple and quick operation to perform only after completing…
How to reset the service in the Renault Captur?
How to reset the service in the Renault Captur?
Renault Captur (2019-2026 / MK 2) In this tutorial, we can see how to reset the service in the Renault Captur, an extremely simple and fast operation to be carried out only once all s…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos