Do it yourself
Frequently asked questions about cars and motorcycles

How to Turn Off the Maintenance Light on a Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Warning light – error code

Insert the card into the designated slot to start your vehicle. Once the dashboard lights up, use the buttons on the right lever to navigate through the options until you find "SERVICE INTERVAL". Press and hold until the screen shows when to perform maintenance. Release the button, then press and hold it again. When it starts flashing, the reset has occurred. Finally, remove the card and reinsert it to verify the reset.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) Let's see today how to perform the service reset and how to turn off the periodic maintenance light on a Renault Clio 5. Let's start the operation by…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Want to turn off the service light on a Renault Clio? Let's see how to turn off the light on the instrument cluster. Turn on the car's instrument clu…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Let’s see how to turn off the maintenance service light on a Renault Clio. This is a very simple operation: enter the vehicle, turn on the ignition w…

    Frequently Asked Questions

    • Clio 2012-2019 - What are the dashboard indicators on the Renault Clio? Read answer
    • Clio 2005-2013 - How do you get the Renault Clio N585 serial number car radio code? Read answer
    • Clio 2005-2013 - What does the electrical fault warning light mean in the Renault Clio? Read answer
    • Clio 2019-2026 - What are the warning lights on the dashboard of the Clio 5? Read answer
    • Clio 2012-2019 - What is the authentication code in a Clio and where is it located? Read answer
    • Clio 2012-2019 - How can I retrieve the unlock code of the car radio of my Renault Clio? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos