Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Light on a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Warning light – error code

See other generations:
Video tutorial

Want to turn off the service light on a Renault Clio? Let's see how to turn off the light on the instrument cluster. Turn on the car's instrument cluster, press the button located above the right-hand lever of the steering wheel, and find the maintenance message.

Press the button until you find the service message, then press the OK button to confirm and reset the light. Set the mileage for the new service.

The instrument cluster will show that maintenance has been completed. Check everything and turn off the instrument cluster.

Start the instrumentation with the key and see if the light appears again. Use the buttons to make various settings.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Before you begin, sit in the driver's seat of your Renault Clio. Start by turning on the ignition by turning the key in the ignition barrel. Next, wa…
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Before you begin, sit in the driver's seat of your Renault Clio. Start by activating the instrument panel. Next, select the "Service Interval" option…
Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2005-2013 - What does the flashing engine light on a Renault Clio III mean? Read answer
    • Clio 2005-2013 - What does the electrical fault warning light mean in the Renault Clio? Read answer
    • Clio 2012-2019 - What is the authentication code in a Clio and where is it located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos