Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre warning light on the Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part:

In this tutorial, you will learn how to reset the tyre warning light on the Renault Kangoo. This operation is extremely simple and quick, and should only be performed after restoring the correct pressure in each tyre according to the instructions in the manual. First, enter the cabin, then turn on the instrument panel. Using the indicator stalk located at the end of the right control lever, navigate to the "SET TP" screen. Once there, press and hold the down arrow button until the warning light resets correctly.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure light on the Renault Kangoo
How to reset the tire pressure light on the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) These short and simple instructions will show us how to reset the tire pressure warning light (TPMS) of the Renault Kangoo; before performing the res…
How to restore the tire pressure monitoring system light on the Renault Kangoo
How to restore the tire pressure monitoring system light on the Renault Kangoo
Renault Kangoo (2020-2026 / KFK, MK 3, FFK) In today's article, we are going to see how to reset the tire pressure light on the Renault Kangoo, in case the light remains on even after adjusting…
How do you reset the tire pressure light on the Renault Kangoo?
How do you reset the tire pressure light on the Renault Kangoo?
Renault Kangoo (2020-2026 / KFK, MK 3, FFK) In order to reset the tire pressure warning light on the Renault Kangoo, you need to inflate the tires until they reach the recommended pressure valu…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos