Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part:

To reset the tire pressure warning light of the Renault Kangoo, you need to turn on the instrument panel by inserting the key into the ignition switch: once the panel is turned on, you can repeatedly press the button on the end of the lever on the right side of the steering wheel. When the tire pressure message appears, you must hold down the same button to make the warning light disappear: to properly perform this operation, you must inflate the tires to the value written on the sticker on the driver's side door pillar beforehand.

Posted on 25 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Renault Kangoo
How to Reset the Tyre Pressure Light on a Renault Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) To reset the tyre pressure light on a Renault Kangoo, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, na…
How to reset the tire pressure light on the Renault Kangoo
How to reset the tire pressure light on the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) These short and simple instructions will show us how to reset the tire pressure warning light (TPMS) of the Renault Kangoo; before performing the res…
How do you reset the tire pressure light on the Renault Kangoo?
How do you reset the tire pressure light on the Renault Kangoo?
Renault Kangoo (2020-2026 / KFK, MK 3, FFK) In order to reset the tire pressure warning light on the Renault Kangoo, you need to inflate the tires until they reach the recommended pressure valu…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos