Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the Megane 4

Model: Renault Megane Megane IV, Megane 4 - Years 2015-2023
Part: Service warning light

In this article, we will analyze the procedure to reset the maintenance light on the Renault Megane 4. This procedure can be useful in case the light remains on after a service. The procedure takes less than 1 minute to complete and no tools or software are needed. To reset the light, simply start the instrument panel, then use the navigation buttons on the right side of the steering wheel to scroll through the menu until you find the maintenance reminder light. Once found, press and hold the ok button, after a couple of seconds the maintenance and oil change reminder will appear, select the correct option and press the ok button again while holding it down to reset. At this point, the procedure is complete.

Posted on 23 March 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2015-2023 / Megane IV, Megane 4) Remove the maintenance light on a Megane? Let's see how to reset the maintenance light. We enter the passenger compartment, turn on the instrument pa…
Renault Megane (2015-2023 / Megane IV, Megane 4) The vehicle in question is the Renault Megane 4, and we will explain how to reset the service light. This procedure should only be carried out after …
Renault Megane (2008-2015 / Megane 3, Megane III) After performing the maintenance service, it will be necessary to reset the inspection (service) warning; let's see the reset procedure on the Renaul…

Other guides you may be interested in

How to Replace the Tailgate Struts on a Citroen C5

Is the tailgate of your car extremely heavy? The gas struts are likely worn out. In this video, see how to fix the pressure loss of the struts on a Citroen C5 tailgate. Lift the tailgate and secure it. Using a screwdriver, remove the retaining clips at both ends of the strut. Disconnect the worn strut and fit the new part into the two mounts. Secure the strut with the metal clips. Repeat the same process for the removal/installation of the other strut. Test the correct operation of the replaced struts.

Watch the video!


by ScegliAuto

More videos