Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp of a Renault Scenic 2

Model: Renault Scenic MK III, Scenic III, Scenic 3, MK 3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight

See other generations:
Video tutorial

In this video, you can see how to remove the front headlamp of a Renault Scenic 2. For this job, you will need a 10 mm ratchet spanner and an extension bar. There are five screws in the headlamp, two of which are on the top, directly connected to the chassis, while the other three are located at the bottom of the bumper and are all easily accessible and visible.

At this point, grasp the entire headlamp assembly and pull it towards you: there are electrical connectors to disconnect, but it comes out very easily, allowing you to change the bulbs without hassle.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

Removing the Front Headlamp Bulb from a Renault Scenic
Removing the Front Headlamp Bulb from a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let's see how to remove the front headlamp bulb from a Renault Scenic. Lift the front bonnet of the car and locate the front headlamp bulbs. Find the…
Replacement of the front headlight of the Renault Scenic
Replacement of the front headlight of the Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Below we will see the instructions that will allow us to disassemble and replace the front headlight of the Renault Scenic. First, we open the hood o…
How to Replace the Headlight Bulb on a Renault Scenic
How to Replace the Headlight Bulb on a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Before you begin, open the front bonnet of your Renault Scenic. Start by removing the blown bulb from its housing in the headlamp by turning the bulb…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos