Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to lower the rear seats in the Renault Megane?

Model: Renault Megane Megane IV, Megane 4 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Seat

See other generations:
Video tutorial

In this tutorial, you will see how to lower the rear seats in the Renault Megane, a very simple and quick operation to perform, for example, if you need more space in the boot. First, open both rear doors, then lower the headrests, locate the lever on the upper edge of the left backrest, and while holding it down, completely lower the backrest.

Move to the opposite side and repeat the operation. To restore everything, simply follow the reverse procedure.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Seats from a Renault Megane
How to Remove the Rear Seats from a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) In this brief guide, we will see the instructions that will allow us to remove and replace the rear seats and the bench of the Renault Megane. First,…
How do you disassemble the seats of the Renault Megane 3?
How do you disassemble the seats of the Renault Megane 3?
Renault Megane (2008-2015 / Megane III, Megane 3) The seats of the Renault Megane 3, specifically the front ones, visible in the attached video, can be easily removed by anyone, just by having a hex …
How to Replace the Front Headlight Bulb on a Renault Megane 3?
How to Replace the Front Headlight Bulb on a Renault Megane 3?
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the front headlight bulb on a Renault Megane 3, open the bonnet to access the engine bay and lower the lever located at the back of the he…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos