Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Fan from the Renault Clio

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Blower motor

See other generations:
This video is currently unavailable

The cabin fan, despite its function, is not located in the cabin as one might imagine. It is positioned in the engine bay, on the passenger side, just below the windscreen.

Once you open the front bonnet, remove the plastic cover to access the fan housing. At this point, remove the air duct and unscrew the two bolts that secure the complete fan motor to its support.

Then disconnect the connectors and complete the disassembly by extracting the unit from its housing. Generally, a clean of the fan and the motor brushes is sufficient to get it working again.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Replacement of the Cabin Fan in the Renault Clio
Replacement of the Cabin Fan in the Renault Clio
Renault Clio (1990-1998 / Clio 1, MK 1) In this brief guide, we will go through the steps on how to remove and replace the cabin fan in the Renault Clio. First, open the car's bonnet and st…
Removing the Cabin Fan from a Renault Clio
Removing the Cabin Fan from a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide provides the main instructions on how to remove and replace the cabin fan in a Renault Clio. First, get inside the cabin and start by remo…
Repair and Removal of Cabin Fan on Renault Clio 3
Repair and Removal of Cabin Fan on Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this video, see how to repair the cabin fan of a Renault Clio third series. First, disconnect the two battery terminals; then access the inside of…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos