Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Timing belt

In order to replace the timing belt of the Renault Clio, you need to lift the car with a jack so that the front right wheel can be removed from its housing. Once this wheel has been removed, you can proceed by also removing the corresponding fender liner. This will allow you to loosen the central nut of the tensioner pulley, which can then be removed in order to remove the timing belt. At this point, you can insert the new belt, which must be tensioned by installing the pulley and ensuring that everything is functioning properly.

Posted on 3 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on the Renault Clio 1.2
Guide to Replacing the Timing Belt on the Renault Clio 1.2
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today we will discover the instructions to remove and replace the timing belt on the petrol Renault Clio 1.2. First, open the bonnet and begin to dis…
Replacing the Timing Belt on Renault Clio 1.5 DCi
Replacing the Timing Belt on Renault Clio 1.5 DCi
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In today's tutorial, you will see the main instructions on how to remove and replace the timing belt on a Renault Clio 1.5 DCi, as well as on other c…
How to Replace the Timing Belt on a Renault Clio 1.8 16v
How to Replace the Timing Belt on a Renault Clio 1.8 16v
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The video shows the steps to replace the timing belt on a Renault Clio. First, disconnect the battery terminal and remove the cover. Next, remove the…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos