Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to remove the bumper of the Renault Megane III

Renault Megane - Video tutorial

Model: Renault Megane Megane 3, Megane III - Years 2008-2015
Part: Front bumper
Operation: How to remove the bumper of the Renault Megane III

In this video we can see how to disassemble the front bumper of the Renault Megane III: we open the hood, and as we can see from the video, there are six symmetrical points where we need to remove some fixing screws at the top. In the front wheel arches we then need to remove two screws, and another one at the top of the same, on each side. Underneath, the bumper is securely fixed with five screws on each side, and once we have removed them from both sides we can pull the bumper towards us and remove the whole piece to carry out any necessary work.


Posted on 4 May 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos