Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the maintenance light on the Renault Kangoo

Model: Renault Kangoo MK 1, KC, KW - Years 1997-2008
Part: Warning light – error code

If you own a first series Renault Kangoo and want to reset the maintenance light after servicing the vehicle on your own, all you have to do is follow these steps. The entire procedure is really simple. First, enter the car and insert the key. Then, turn it to position 2 and start the instrument panel. Next, press the button located below the speedometer and wait for the maintenance light reset to complete. Finally, turn off the instrument panel.

Posted on 9 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Kangoo
How to Reset the Service Light on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) What to do if the service light appears on a Renault Kangoo? Here's how to reset the service light on the Kangoo. Turn on the instrument panel (you w…
How to Reset the Service Light on the Renault Kangoo
How to Reset the Service Light on the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) In a few simple steps, we will see how to reset the service light for the regular maintenance oil change on the Renault Kangoo. First, get in the veh…
Reset the Maintenance Light on a Kangoo
Reset the Maintenance Light on a Kangoo
Renault Kangoo (1997-2008 / MK 1, KC, KW) Do you want to reset the maintenance light on a Renault Kangoo? Here’s how to reset the maintenance light. Turn on the instrument panel with the key,…

    Frequently Asked Questions

    • Kangoo 2007-2021 - What does the Serv warning light mean on a Renault Kangoo? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos