Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the Service light on a Renault Clio 4?

Model: Renault Clio MK 4, Clio IV, Clio 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Service warning light

See other generations:
Video tutorial

The procedure to reset the Service light on a Renault Clio involves inserting the key and switching on the instrument panel, navigating through the menu using the directional buttons located on the lever to the right of the steering wheel. Once you find the maintenance interval option, press and hold the button with the upward arrow for a few seconds until a screen appears indicating how long until the next service.

By holding the button with the downward arrow, the message will start to flash and will turn off once the reset is complete.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) Let’s see how to reset the service light on a Renault Clio V: turn on the ignition without starting the engine and wait for the instrument test. Navi…
Renault Clio (2019-2026 / Clio V, Clio 5) To reset the Service light on the Renault Clio 5, turn on the ignition and navigate through the menu that appears on the display using the directiona…
Renault Clio (2005-2013 / Clio III, MK 3, Clio 3) To reset the Service light on the Renault Clio, turn on the instrument panel and then press and hold the button at the end of the lever to the right …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Remove the Cabin Fan in the Nissan Qashqai?

The cabin fan in any vehicle, specifically the Nissan Qashqai this time, may fail for various reasons: blown fuse, shorted wire, but the most serious issue is a broken fan. This means you need to remove it and check it, and if necessary, replace it. In this vehicle, it is located in the footwell area, so you will need to remove the carpet covering of the centre tunnel, then carefully navigate through the various wires present, and finally, once located, disconnect the electrical wires supplying it and unscrew the fixing screws.

Watch the video!


by ScegliAuto

More videos